IEWC.com

VFM Rack Mount, Wall Mount and Head End Solutions

Variable Fiber Management (VFM®) solutions revolutionize the installation of fiber by combining high-fiber-count cables with innovative fiber panels. This approach significantly reduces engineering, ordering, and installation time, providing a cost-effective and efficient way to deploy fiber. Faster installation compared to traditional methods doesn't compromise performance, resulting in a superior cable plant. These solutions find applications in diverse settings, from DAS and cell sites to data centers and central offices.

FEATURES AND BENEFITS

  • Reduces engineering costs by eliminating the need for precise measurement of fiber cable lengths. In many cases, the cost of a pre-site survey can be eliminated.
  • Plug & Play Splice-Free. The cable is factory terminated and tested to facilitate quick installation. Removes the time and cost needed to prep and splice fiber.
  • VFM® is available in a variety of fiber cable types: OFNR (riser), OFNP (plenum), and Cablcon’s Corr2Flex® micro-armor cable, designed for easy routing in tight areas. Corr2Flex® plenum cable is crush resistant to 750N, and the flame retardant cable is crush resistant to 950N (3.0mm) and 650N (4.0mm).
  • 12, 24 & 48-fiber factory terminated MPO connectors tested to GR 326. The payout spool includes a pulling eye for ease of installation.
  • Available in both bend insensitive single mode and laser optimized OM3 & OM4 multimode.
  • Quick-Ship. Able to ship custom lengths with your run tolerance 3-4 days after receipt of an order (ARO). No need to order 500’ when a 425’ is needed, resulting in cost savings.

VFM® may be “kitted” along with additional project items such as attenuators, fiber optic patch cords, racks & enclosures, hardware, RF braid jumpers, RF ¼” & ½” JMA PIM rated jumpers and FlexTel® cloth DC power cable.

IN-BUILDING RACK MOUNT VARIABLE FIBER-LENGTH MANAGEMENT SYSTEM (VFM®)

2RU RACK MOUNT VFM® W/ FIBER MANAGEMENT SPOOL Q6313-4002L

  • 17”W x 15”D x 3.5”H
  • Manages fiber tolerance of 300’ in OFNR/OFNP and 200’ in Corr2Flex®.
  • 2-Piece removable cover for front & rear access, as well as slide tray.
  • Front & rear dual cable entry/exit ports and 19” & 23” mounting ears.
  • Insert D-rings, adhesive slack management routing guides & Velcro ties.
  • (6) Adapter-Plate capacity for fiber and/or power distribution.
  • Cassette options include:
    • MPO to 12-position LC/UPC or APC duplex cassette
    • MPO to 24-position LC/UPC or APC quad cassette
    • MPO to 12-position SC/UPC or APC duplex cassette

1RU RACK MOUNT VFM® W/ FIBER MANAGEMENT SPOOL Q6313-4001L

  • 17”W x 15”D x 1.75”H
  • Manages fiber tolerance of 150’ in OFNR/OFNP and 100’ in Corr2Flex®.
  • 2-Piece removable cover for front & rear access, as well as a slide tray.
  • Front & rear dual cable entry/exit ports and 19” & 23” mounting ears
  • Adhesive slack management routing guides & Velcro ties.
  • (3) Adapter-Plate capacity for fiber and/or power distribution.
  • Cassette options include:
    • MPO to 12-position LC/UPC or APC duplex cassette
    • MPO to 24-position LC/UPC or APC quad cassette
    • MPO to 12-position SC/UPC or APC duplex cassette

WALL MOUNT SLACK MANAGEMENT Q6313-6044L

  • Allows for excess fiber cable to be spooled and maintained for the life of your installation.
  • Fiber can be stored with either a single or dual reel solution.
  • By distancing or spacing the reels in the dual reel application, a greater amount of cable may be stored.

DIMENSIONS

Baseplate: 14”W x 20”L
Arms: 10” D

POWER DISTRIBUTION Q6313-PWR1

  • 12-Position 2-Piece terminal accepting 10awg-24awg in a single adapter plate.
  • 2-Piece terminal allows installer to load in VFM® while terminating opposite side for ease of installation.
  • Continuous cable mount strip with screw fastening hardware for fixed installation.

IN-BUILDING WALL MOUNT VARIABLE FIBER-LENGTH MANAGEMENT SYSTEM (VFM®)

WALL MOUNT VFM® W/ FIBER MANAGEMENT SPOOL Q6313-6004-VFM

  • 15 3/4” W x 3 1/2” D x 14 5/8” H
  • Manages fiber tolerance of 300’ in OFNR/OFNP and 200’ in Corr2Flex®.
  • Dual hinged clamshell doors, allowing for accessibility and easy management of fiber in storage area and cassette ports.
  • Dual cable entry/exit ports on both top and bottom of panel.
  • Adhesive slack management routing guides & Velcro ties.
  • (4) Adapter-Plate capacity for fiber and/or power distribution.
  • Cassette options include:
    • MPO to 12-position LC/UPC or APC duplex cassette
    • MPO to 24-position LC/UPC or APC quad cassette
    • MPO to 12-position SC/UPC or APC duplex cassette

IN-BUILDING RACK MOUNT HEAD END PANELS FOR VFM®

1RU RACK MOUNT HEAD END FIBER DISTRIBUTION Q6313-10A1L

  • 17”W x 15”D x 1.75”H
  • (3) Adapter-Plate / Cassette capacity.
  • 2-Piece removable cover for front & rear access, as well as a slide tray.
  • Front & rear dual cable entry/exit ports and 19” & 23” mounting ears.
  • Adhesive slack management routing guides & Velcro ties.
  • Cassette options include:
    • MPO to 12-position LC/UPC or APC duplex cassette
    • MPO to 24-position LC/UPC or APC quad cassette
    • MPO to 12-position SC/UPC or APC duplex cassette

2RU RACK MOUNT HEAD END FIBER DISTRIBUTION Q6313-10A3L

  • 17”W x 15”D x 3.5”H
  • (6) Adapter-Plate / Cassette capacity.
  • 2-Piece removable cover for front & rear access, as well as slide tray.
  • Front & rear dual cable entry/exit ports and 19” & 23” mounting ears.
  • Insert D-rings, adhesive slack management routing guides & Velcro ties.
  • Cassette options include:
    • MPO to 12-position LC/UPC or APC duplex cassette
    • MPO to 24-position LC/UPC or APC quad cassette
    • MPO to 12-position SC/UPC or APC duplex cassette